SHEQ EXCELLENCE GROUP LTD

Includes English and your selected language. Open the downloaded file in a browser to print or save as PDF. Trainer notes and marking keys are not included.

English · Version 2.0 · Learner edition

Work at Height - Before You Start

30 min facilitated workshop

Participant name
Date

Independent awareness learning for Great Britain (England, Scotland and Wales). Not HSE approved or accredited; not a regulated qualification or permission to work. Reading online does not establish practical competence or successful course completion.

Learning outcomes

Course scope

Awareness and planning only. No scaffold erection/inspection, MEWP operation, harness-user or rescue qualification is awarded.

Workshop lessons

01

Avoid, prevent, then minimise falls

Lesson explanation

First consider doing the task from ground level. If height cannot be avoided, select suitable collective protection before relying on personal fall protection. The available ladder is not automatically the right choice. Equipment selection must consider the task, duration, access and people below; a course or permit cannot replace that assessment.

Apply this lesson to the case study before completing the worksheet. Identify what you know, what remains uncertain and who can supply reliable evidence. Record a practical action, a responsible person and a check that would show the action worked. Discuss your decision with a competent supervisor; reading and quiz completion do not authorise the work.

Key points to remember

  • First consider doing the task from ground level.
02

Equipment and competence checks

Lesson explanation

Confirm the access equipment is suitable, stable and checked by the appropriate competent people. Follow its instructions and site restrictions. Report defects and prevent use until resolved. A scaffold tag alone does not establish that every inspection or design requirement is satisfied. Know the limits of your training and appointed role.

Apply this lesson to the case study before completing the worksheet. Identify what you know, what remains uncertain and who can supply reliable evidence. Record a practical action, a responsible person and a check that would show the action worked. Discuss your decision with a competent supervisor; reading and quiz completion do not authorise the work.

Key points to remember

  • Confirm the access equipment is suitable, stable and checked by the appropriate competent people.
03

Edges, fragile surfaces and rescue

Lesson explanation

Treat a roof as fragile until a competent person confirms otherwise. Plan safe access, protected openings and control of falling objects. Removing a barrier needs planned alternative protection and controlled reinstatement. Where a fall could leave someone suspended or inaccessible, provide a workable rescue arrangement before starting rather than relying only on emergency services.

Apply this lesson to the case study before completing the worksheet. Identify what you know, what remains uncertain and who can supply reliable evidence. Record a practical action, a responsible person and a check that would show the action worked. Discuss your decision with a competent supervisor; reading and quiz completion do not authorise the work.

Key points to remember

  • Treat a roof as fragile until a competent person confirms otherwise.
04

Weather, interfaces and restart

Lesson explanation

Set task-specific limits for weather and equipment use. Rain, wind, damaged protection or deliveries below can invalidate the original plan. Pause affected work, protect others and report the change. A supervisor must arrange the appropriate review and authorised restart. Do not infer a universal safe wind speed or working height from this awareness course.

Apply this lesson to the case study before completing the worksheet. Identify what you know, what remains uncertain and who can supply reliable evidence. Record a practical action, a responsible person and a check that would show the action worked. Discuss your decision with a competent supervisor; reading and quiz completion do not authorise the work.

Key points to remember

  • Set task-specific limits for weather and equipment use.

Practice case

Fictional discussion exercise. This is not an approved assessment, supplier SDS, traffic plan or permit for live work.

Two fitters must install a sign above a shop entrance. A ladder is available, deliveries pass below and a nearby rooflight has no confirmed load capacity. The planned access changes after rain. The manager asks the crew to finish before opening.

Your tasks

  1. List the missing information and identify what prevents a safe start.
  2. Choose suitable controls and name who must verify them.
  3. Explain your stop decision, escalation route and restart conditions.
  4. Brief the team and ask them to explain the controls in their own words.
Information still missing
Decision before starting or continuing

Planning worksheet

Do not invent missing technical specifications. Record uncertainty and identify the competent person or authorised role needed to resolve it.

Issue or work stage
Control or information needed
Owner and check
Issue or work stage
Control or information needed
Owner and check
Issue or work stage
Control or information needed
Owner and check
Issue or work stage
Control or information needed
Owner and check
Issue or work stage
Control or information needed
Owner and check
Pause and restart arrangements

Knowledge check

Answer in your own words. Discuss your reasoning with a competent trainer or supervisor. No automatic pass, certificate or work authorisation is issued here.

  1. The only available ladder has not been assessed for the sign-installation task. May the crew start?
  2. The rooflight's load capacity is unknown. How should access be planned?
  3. Does a scaffold tag alone establish all inspection and design requirements are met?
  4. Rain changes the planned access. What should happen before restarting?
  5. Conditions differ from the plan when the crew arrives. What should happen?
  6. A worker cannot explain an important control after the briefing. What next?
  7. The client offers a generic RAMS pack for a different site. How should it be used?
  8. Does completing this workshop authorise a specialist task?
  9. A client asks the crew to remove a protection briefly to save time. What is appropriate?
  10. Another crew still relies on a shared isolation when your task finishes. What next?
  11. What should a useful handover identify?
  12. A near miss reveals a failed control but nobody is injured. What should follow?

Workplace action and feedback

One change I will make
Who must help or authorise the change
Target date and supervisor contact
How we will check the change works
Further instruction or practical training needed
What is clearer now? What remains unclear? Were the language, pace and format suitable?

Official HSE sources (English)

Source check: 6 November 2026. Review current guidance and actual site procedures before use. Northern Ireland and other jurisdictions need separate review.

Version 2.0 · Learner edition · SHEQ Excellence Group Ltd